Comments on: Vibration Monitoring Phase Measurement And The Tacho Signal http://blog.prosig.com/2008/03/04/vibration-monitoring-phase-measurement-and-the-tacho-signal/ Telling you what you need to know about noise & vibration Tue, 07 Feb 2012 15:32:30 +0000 hourly 1 http://wordpress.org/?v=3.3.1 By: Chris Masonhttp://blog.prosig.com/2008/03/04/vibration-monitoring-phase-measurement-and-the-tacho-signal/comment-page-1/#comment-782 Chris Mason Fri, 23 Apr 2010 13:21:48 +0000 http://blog.prosig.com/2008/03/04/vibration-monitoring-phase-measurement-and-the-tacho-signal/#comment-782 Hi Nima, you can request a CD or handbook using the links near the top of the page or visithttp://www.prosig.com/formHandbook.html - for a free Noise & Vibration Handbook http://www.prosig.com/formCD.html - for a free Solutions CD Hi Nima, you can request a CD or handbook using the links near the top of the page or visit

http://www.prosig.com/formHandbook.html – for a free Noise & Vibration Handbook
http://www.prosig.com/formCD.html – for a free Solutions CD

]]> By: nimahttp://blog.prosig.com/2008/03/04/vibration-monitoring-phase-measurement-and-the-tacho-signal/comment-page-1/#comment-781 nima Fri, 23 Apr 2010 12:17:06 +0000 http://blog.prosig.com/2008/03/04/vibration-monitoring-phase-measurement-and-the-tacho-signal/#comment-781 hi please sen handbook,cd,pdf data about vibration analysis or condition monitoring, Phase Measurement And The Tacho for me.goodby hi please sen handbook,cd,pdf data about vibration analysis or condition monitoring, Phase Measurement And The Tacho for me.

goodby

]]> By: alihttp://blog.prosig.com/2008/03/04/vibration-monitoring-phase-measurement-and-the-tacho-signal/comment-page-1/#comment-544 ali Thu, 02 Apr 2009 10:14:59 +0000 http://blog.prosig.com/2008/03/04/vibration-monitoring-phase-measurement-and-the-tacho-signal/#comment-544 WE ARE NOT USE PHASE MEASUREMENT TO ANALYSIS VIBRATION PROBLRMS , IS TI OK WE USE ONLY FFT ANALYSIS WITH SOFTWERE EMONITORING AND DATA CO-1500 WE ARE NOT USE PHASE MEASUREMENT TO ANALYSIS VIBRATION PROBLRMS , IS TI OK
WE USE ONLY FFT ANALYSIS WITH SOFTWERE EMONITORING AND DATA CO-1500

]]> By: jameshttp://blog.prosig.com/2008/03/04/vibration-monitoring-phase-measurement-and-the-tacho-signal/comment-page-1/#comment-543 james Tue, 31 Mar 2009 08:47:14 +0000 http://blog.prosig.com/2008/03/04/vibration-monitoring-phase-measurement-and-the-tacho-signal/#comment-543 Hello and thank you for asking a question on our blog, we are always happy to receive such queries.To answer your question it's possible to use a particular order of the vibration to deduce a tacho signal, and therefore a speed curve. Depending of your shaft the order will be different, for a turbine it's nomrally 1st order, for an automotive crank shaft its going to be 2nd order normally.You could use a P8000 and the DATS signal processing software and an accelerometer to deduce a tacho signal and a speed curve for you.I believe your already in contact with our local Prosig office so they can assist you in progress further with your project.If you have any further questions, please feel free to ask. Hello and thank you for asking a question on our blog, we are always happy to receive such queries.

To answer your question it’s possible to use a particular order of the vibration to deduce a tacho signal, and therefore a speed curve. Depending of your shaft the order will be different, for a turbine it’s nomrally 1st order, for an automotive crank shaft its going to be 2nd order normally.

You could use a P8000 and the DATS signal processing software and an accelerometer to deduce a tacho signal and a speed curve for you.

I believe your already in contact with our local Prosig office so they can assist you in progress further with your project.

If you have any further questions, please feel free to ask.

]]> By: numairhttp://blog.prosig.com/2008/03/04/vibration-monitoring-phase-measurement-and-the-tacho-signal/comment-page-1/#comment-540 numair Tue, 24 Mar 2009 08:48:25 +0000 http://blog.prosig.com/2008/03/04/vibration-monitoring-phase-measurement-and-the-tacho-signal/#comment-540 Dear Sir We are the test rig manufacturer so in application we need to measure the rotational speed of a turbine by using the vibrations associated.We are using accelerometer for this purpose.We want to know how we can measure the rotataional speed of turbine by using accelerometer only.Please describe the whole setup for measuring the speed of the turbine by using vibrations.Thanking You. Dear Sir
We are the test rig manufacturer so in application we need to measure the rotational speed of a turbine by using the vibrations associated.We are using accelerometer for this purpose.We want to know how we can measure the rotataional speed of turbine by using accelerometer only.Please describe the whole setup for measuring the speed of the turbine by using vibrations.

Thanking You.

]]>