The following application note describes the test and measurement process for the fatigue testing and development cycle of a component. Strain gauges were used to monitor the strain levels in a particular suspension component. The component had been known to fail at various intervals. A predicted life for the component was required to analyse the [...]
|
||||||
|
Share:
Not all systems vary linearly. One very well known case is, of course, thermocouples. International standard curves are available for these so they present little difficulty. The issue discussed here is determining a calibration curve and if appropriate reducing to a polynomial. |
|
|||||
|
Copyright © 2001 - 2010 Prosig Noise & Vibration Blog - All Rights Reserved |
||||||
Recent Comments