SHAFT DISPLACEMENT MEASUREMENT USING A PROTOR SYSTEM
By Don Davies, Technical Director, Prosig
Shaft displacement is an important vibration measurement for rotating machines. Shaft displacement is usually monitored by non-contact shaft displacement probes such as eddy-current probes. These probes produce a voltage proportional to the distance of the shaft surface relative to the tip of the probe. For maximum benefit, ideally two shaft displacement probes will be fitted to measure the displacement in both the horizontal and vertical directions. Actually the probes do not have to be exactly horizontal and vertical as PROTOR (http://www.prosig.com/protor) is able to resolve into the horizontal and vertical directions.
read »»»
Most engineers are probably familiar with or have come across the decibel or dB as a unit of measurement. Its most common use is in the field of acoustics where it is used to quantify sound levels. However, as will be explained in this article, it is also useful for a wide variety of measurements in other fields such as electronics and communications.
