How do I balance a shaft?

“How do I balance a shaft?” seems like a fairly straightforward question, but there are a number of things that we need to understand first. Here we look at a number of key concepts that need to be understood in order perform balancing.

What does balance mean?

Well broadly speaking to balance a shaft, mass must be added or removed at certain angles. The concept being that the centre of gravity and rotational centre of the shaft will be equal when the shaft is balanced. (more…)

Continue ReadingHow do I balance a shaft?

Why does Auto-Zero have no effect for IEPE sensors?

  • Post author:
  • Reading time:2 mins read
  • Post comments:0 Comments
  • Post category:P8000

The Prosig P8000 Auto-Zero function is used to remove the DC content of a signal.

For example, if you have a sine wave that is ±5 volts about 0 volts it has no DC offset. But if you have a sine wave with ±5 volt amplitude about 3 volts, then it has a 3 volt DC offset. Below is an example of these two sinewaves.

Two sine waves with and without DC offset

(more…)

Continue ReadingWhy does Auto-Zero have no effect for IEPE sensors?