Analyzing Shaft Twist And Repairing Damaged Tachos

This post discusses analyzing shaft twist and at the same time handling the less than perfect data that we have all come across.

A shaft has been instrumented with two shaft encoders, one at each end. Each shaft encoder gives out a once/rev pulse and a 720 pulses/rev signal. Each signal was digitised at 500,000 samples/second. The objective is to measure the twist in the shaft and analyze into orders. The test stand was already equipped with a data acquisition system so a Prosig acquisition system was not required. Instead it was decided that the data captured by the resident system would be imported into the DATS software. The only format available from the customer system was ‘comma separated variables’ or CSV. This is not ideal as it is an ASCII based format and therefore creates very large files.


Continue ReadingAnalyzing Shaft Twist And Repairing Damaged Tachos