Automatic Reports Using The Intaglio Report Generator
https://www.youtube.com/watch?v=MWrDPpLh5-U
All types of videos – tutorials, news etc
Making an Orbit Plot
A short video tutorial describing how to create an orbit plot using the DATS software https://www.youtube.com/watch?v=VP4esKwLuCg
DATS Multi Plane Balancing Tutorial (Part 4)
https://www.youtube.com/watch?v=uGWQELrZn_o
DATS Multi Plane Balancing Tutorial (Part 3)
https://www.youtube.com/watch?v=W-Dcd3k2r2I
Sound Mapping Software Example
https://www.youtube.com/watch?v=KNZ3In5sisA
DATS Multi Plane Balancing Tutorial (Part 2)
https://www.youtube.com/watch?v=3iAfvjMWE6U
DATS Multi Plane Balancing Tutorial (Part 1)
https://www.youtube.com/watch?v=TtfKx6P0qNU
[Video] Exporting DATS datasets in non-linear format
To complement our recent post on Exporting DATS datasets in non-linear format here is James Wren demonstrating the method. https://www.youtube.com/watch?v=sh6Q3FwjtR4
How to set up scheduled data captures
A video that explains how to set up the DATS Data Acquisition software to perform captures at specific, scheduled times. https://www.youtube.com/watch?v=jeJ6a0U9vjk
[Video] Create AVI files from your structural animations
The DATS Modal Analysis software consists of Hammer Impact Testing, Modal Analysis & Structural Animation (often referred to as Operational Deflection Shapes or ODS and Running Modes). Having measured and…
[Video] Creating speed signals for data with no tacho
So you've got some noise and/or vibration data from a rotating machine, but no speed information. Surely that means you can't analyse against speed or do any order analysis, right?…
[Video] Using reference cursors to measure data
A tutorial by James Wren (Prosig UK) on how to use the reference cursors in the DATS software to precisely measure features in your data. http://www.youtube.com/watch?v=PSnldTfaQIE
[Video] Storing FRFs, coherence & time series
James Wren (Prosig UK) explains how to store FRFs, coherence and/or time series data in modal hammer testing using Prosig's P8000 & DATS software. http://www.youtube.com/watch?v=JLumlmoRCvM
[Video] What are nodes, components & structures in modal testing
James Wren (Prosig UK) explains how nodes, components & structures are used in modal hammer testing using Prosig's P8000 & DATS software. http://www.youtube.com/watch?v=FmNCqv7p3pc
[Video] Disabling P8000 cooling fans during data capture
Justin Foster (Prosig UK) explains how to set up the DATS software to switch off the P8000's cooling fans during data capture. This can be important to reduce noise during…
[Video] Performing a Hammer Impact Test
James Wren (Prosig UK) provides a step-by-step guide to performing a Hammer Impact Test on a structure using Prosig's DATS software and P8000 data acquisition hardware. http://www.youtube.com/watch?v=YrCM3H0_NpE
[Video] Calibrating a strain gauge for use with a Prosig P8000 system
James Wren (Prosig UK) steps through how to calibrate a strain gauge for use with a Prosig P8000 system. http://www.youtube.com/watch?v=BAh9PS632Tk
[Video] A simple CAN-bus measurement setup
A simple tutorial that explains how to use the DATS Acquisition software to set up a Prosig P8000 to capture data from a CAN-bus. http://www.youtube.com/watch?v=XeAuntGW-O4
[Video] Brake Runout & DTV Measurement
https://www.youtube.com/watch?v=v32IhaUVGpM
[Video] Creating order & waterfall plots
A step-by-step introduction to creating order and waterfall plots from a time history and a tacho signal. http://www.youtube.com/watch?v=KpO4RLu6Onc
[Video] Setting up a P8000 system to capture CAN-bus data
The P8012, P8020 & P8048 can all be fitted with the 8440 CAN-bus/GPS card. Setting up the P8000 to capture CAN-bus data is extremely simple. In the following video, James…
[Video] Displaying 3-D views using a linear, log & dB scale
James Wren explains how to view 3-D visualizations using linear, logarithmic & dB scales. http://www.youtube.com/watch?v=mnfchJCO8-4
[Video] How To Transpose 3-D Graphs
James Wren explains how 3-D graphs can be transposed using Prosig's DATS software. http://www.youtube.com/watch?v=FtUOThwuu1I
![Read more about the article [Video] How To Calibrate Microphones & Accelerometers](https://prosigblog.b-cdn.net/wp-content/uploads/2011/10/microphone-640-250.jpg)
[Video] How To Calibrate Microphones & Accelerometers
Here are two videos on a relatively simple, but sometimes misunderstood procedure – how to calibrate microphones & accelerometers (more…)
[Video] How To Analyze Noise & Vibration From Rotating Machines
This is complete version of the video illustrating my recent article How To Measure Noise & Vibration In Rotating Machines. This video was previously published on the blog in 3 parts.…
