James Wren (Prosig UK) provides a step-by-step guide to performing a Hammer Impact Test on a structure using Prosig's DATS software and P8000 data acquisition hardware. http://www.youtube.com/watch?v=YrCM3H0_NpE
Shaft displacement is an important vibration measurement for rotating machines. Shaft displacement is usually monitored by non-contact shaft displacement probes such as eddy-current probes. These probes produce a voltage proportional to the distance of the shaft surface relative to the tip of the probe. For maximum benefit, ideally two shaft displacement probes will be fitted to measure the displacement in both the horizontal and vertical directions. Actually the probes do not have to be exactly horizontal and vertical as Prosig’s PROTOR system is able to resolve into the horizontal and vertical directions.
