In this tutorial we will be creating order plots using waterfall and intensity displays using use the DATS.toolbox and Rotating Machinery Analysis option.
To begin, a noise, vibration or other signal of interest should be captured along with a tachometer signal.
In Figure 1 we have loaded a time series (in this case an acceleration signal) and a time series of a tachometer pulse train into the DATS software.
A vibration problem arose at an Open Cycle Gas Turbine. Following an outage on the four gas turbines and two SSS[1] clutches, the machine returned to service with unacceptable vibration…
This is complete version of the video illustrating my recent article How To Measure Noise & Vibration In Rotating Machines. This video was previously published on the blog in 3 parts.…
This is the complete version of the video illustrating my recent article How To Measure Noise & Vibration In Rotating Machines. This video was previously published on the blog in 3…
